Luyang 24V Brushless DC Motor Manufacturer and Supplier

A brushless DC motor uses electronic commutation instead of carbon brushes and a mechanical commutator. This brush-free design reduces brush wear and related replacement requirements compared with conventional brushed DC motors.

The BH Series operates from a DC 24V power supply and uses a thin, lightweight driver designed for compact equipment integration. Luyang supplies matched motor and driver configurations to help equipment manufacturers reduce wiring uncertainty, simplify installation, and shorten commissioning time.

For applications that require lower output speed or higher output torque, applicable BH Series models can be configured with a gearbox. Standard reduction ratios range from 5:1 to 100:1.

Depending on the selected model and driver configuration, BH Series drivers support practical motor-control functions for equipment integration:

• Internal speed setting
• External speed setting through DC 0-5V input
• Internal or external speed selection
• Acceleration and deceleration time settings
• Torque range setting
• START/STOP input
• RUN/BRAKE input
• Motor direction control
• ALARM RESET input
• SPEED output
• ALARM output

The published driver settings allow acceleration and deceleration time adjustment from approximately 0.1 to 12 seconds. Actual equipment motion will still depend on load inertia, load torque, motor selection, gearbox ratio, and operating conditions.

Some driver configurations include a P4 connector. Confirm its intended function and wiring method in the applicable product manual before use.

Actual torque, gearbox compatibility, dimensions, protection functions, allowable load, and operating conditions vary by model. Confirm the individual specification before purchase.

• Match Existing DC 24V Equipment Architectures

  The BH Series is designed for DC24V input, making it suitable for equipment that already uses a low-voltage DC power system. This can simplify power-system planning for compact machinery, mobile equipment, and DC-powered automation.

• Integrate Controlled Motion in Limited Space

  The compact motor structure and lightweight driver support installations where panel space, equipment size, or system weight must be managed carefully.

• Adjust Speed and Torque Limits for the Application

  Speed settings, acceleration and deceleration parameters, and torque range settings help engineers adapt the motor system to the actual mechanical load and required operating sequence.

• Configure Output Speed and Torque With a Gearbox

  A compatible gearbox can reduce output speed while increasing available output torque. This helps machine builders match the drive system to conveying, feeding, handling, or positioning mechanisms.

• Reduce Brush-Related Maintenance Requirements

  Because the motor does not use carbon brushes, it reduces brush wear and the related replacement requirement. The complete machine should still be maintained according to its operating conditions and maintenance plan.

• Identify Abnormal Operating Conditions

  Depending on the model and driver specification, protection functions may include overload, overcurrent, overvoltage, undervoltage, overspeed, motor stall, detector abnormality, driver abnormality, and initial-start abnormality. These functions help identify abnormal conditions but do not replace complete machine safety design or system-level protection.

• Compact Automation Equipment

  Suitable for mechanisms that require DC 24V input, adjustable speed, controlled acceleration, and compact motor-driver installation.

• Automated Carts and Mobile Equipment

  Low-voltage DC power can suit certain material-handling carts and mobile equipment. Select the motor based on required load, operating time, power-source capacity, and duty cycle.

• Conveyors and Material Handling Systems

  A geared BH Series motor can support compact conveying and handling mechanisms that require adjustable speed and higher output torque.

• Packaging Machinery

  Suitable for feeding, conveying, and other repetitive-motion mechanisms in packaging equipment where a compact DC motor system is preferred.

• Power Tools and Light Electric Equipment

  The brushless DC design can be evaluated for selected power tools and light electric equipment. Final suitability depends on load, duty cycle, available power capacity, and operating environment.

• The Equipment Uses a DC 24V Power Supply

  The BH Series is designed for DC 24V input, helping manufacturers select a motor system that matches an existing low-voltage power architecture.

• The Equipment Has Limited Installation Space

  The compact motor and lightweight driver help engineers integrate controlled motion into smaller machines and equipment.

• The Application Requires Controlled Torque

  Torque range settings allow designers to set an operating range appropriate for the mechanical load and intended equipment behavior.

• Motor and Driver Integration Creates Extra Work

  Luyang supplies matched motor and driver configurations, helping reduce compatibility, wiring, and commissioning uncertainty.

• The Motor Does Not Match the Actual Application

  Luyang can help customers evaluate output power, target speed, torque, gearbox ratio, load, duty cycle, power conditions, and installation environment before selection.

Luyang Technology Co., Ltd. is a Taiwan-based motor and gear reducer manufacturer established in 1981. The company supplies brushless dc electric motors, AC motors, gear motors, gearboxes, and related motor products for industrial equipment.

Luyang's capabilities include:

• More than 40 years of motor and gear reducer manufacturing experience
• Taiwan manufacturing, technical support, testing, and quality-control facilities
• ISO 9001:2015 quality management system
• IQC, IPQC, FQC, and OQC inspection processes
• PDCA-based manufacturing improvement
• Motor testing, torque detection, and dimensional measurement equipment
• Supply experience in North America, Europe, Japan, India, and Southeast Asia
• Standard Luyang-brand brushless dc electric motor configurations
• OEM and ODM project evaluation for qualified requirements

The BH Series is primarily offered in standard motor and driver configurations to support efficient selection and integration.

For suitable OEM or ODM projects, Luyang can evaluate requirements based on the application, requested control functions, expected volume, technical feasibility, regulatory requirements, and commercial conditions. For most projects, starting with a standard BH Series configuration is an effective way to validate motion performance before considering a customized solution.

Q1: What is a 24V brushless DC motor?

A 24V brushless DC motor operates from a DC 24V power supply and uses an electronic driver to control motor operation. Unlike a conventional brushed DC motor, it does not use carbon brushes or a mechanical commutator.

Q2: What brushless DC motor output options are available?

Luyang BH Series brushless DC motors are available in 30W, 50W, and 100W output options. Select the appropriate brushless DC motor model based on required speed, torque, load, duty cycle, and gearbox requirements.

Q3: What is the brushless DC motor speed-control range?

The listed BH Series models provide a speed-control range of 100 to 3,000 r/min. Actual operating speed depends on the selected model, load, and system configuration.

Q4: Can I use external speed control with a brushless DC motor?

Yes. The listed Luyang brushless DC motor driver configuration supports external speed setting through a DC 0-5V input, as well as internal and external speed selection. 

Q5: Can the brushless DC electric motor be used with a gearbox?

Yes. Applicable geared models can use standard reduction ratios from 5:1 to 100:1. Select the ratio according to the required output speed, torque, and load.

Q6: Can I adjust torque limits on a brushless DC electric motor?

Yes. The Luyang brushless DC motor driver supports torque range settings. Provide the required operating conditions to Luyang so the suitable brushless DC motor, driver, and gearbox configuration can be evaluated. 

Q7: What protection functions are available for a brushless DC motor?

Depending on the brushless DC motor model and driver specification, protection functions may include overload, overcurrent, overvoltage, undervoltage, overspeed, motor stall, detector abnormality, driver abnormality, and initial-start abnormality. Confirm the applicable protection functions in the individual product specification. 

Q8: Is the BH Series brushless DC motor suitable for battery-powered equipment?

The BH Series uses DC 24V input and can be evaluated for DC-powered or battery-supported equipment. The full system design must consider battery capacity, current demand, operating time, wiring, and system-level protection.

Q9: Does Luyang provide brushless DC motor OEM or ODM service?

Luyang can evaluate OEM and ODM projects for suitable applications. Custom requirements are assessed based on the application, control requirements, expected volume, technical feasibility, and commercial conditions.